+
  • mmexport1755421407516.jpg

60114799 500Bar High‑Pressure Round‑Plug Sensor for Sany SY215‑8‑10 Excavator

60114799 Sany 500‑Bar round‑plug high‑pressure sensor with Danfoss core fits SY215‑8‑10, SY335‑10 excavators. It transmits hydraulic‑pressure signals to ECU to resolve engine‑lugging problems with OEM plug‑and‑play and factory‑calibration.

Category

Keyword:Four wheels in one belt、Forged bucket teeth

Detailed introduction

Product Name

Sany Excavator Round‑Connector High‑Pressure Sensor

Part No.:60114799, Original Model: Danfoss MBS1250, Measuring Range:0‑500Bar

 

Applicable Models

Fit for Sany Excavator SY215‑8‑9‑10, SY235, SY285, SY335‑8‑9‑10, installed on main hydraulic pump and control valve.

 

Technical Parameters

  1. Measuring Range:0‑500Bar (50MPa), Supply Voltage:5V, Output:0.5‑4.5V; 2‑pin round OEM plug‑and‑play connector with built‑in O‑ring seal.
  2. Function: It collects real‑time high‑pressure data of hydraulic main circuit and sends signals to excavator ECU to adjust pump output. Defective sensor will lead to weak operation, slow movement, engine‑lugging and hydraulic fault codes.

 

Product Advantages

  1. Imported Danfoss‑made core resists high‑pressure impact and hydraulic‑oil corrosion under harsh construction‑site conditions with continuous vibration and high‑temperature;
  2. Anti‑oxidation metal pins inside round‑plug avoid poor‑contact problems; precision stainless‑steel thread with sealing‑ring prevents oil‑leakage for direct‑fit installation;
  3. OEM original and aftermarket replacement versions available. Every unit passes pressure‑calibration test before delivery with 3‑12‑month warranty.

 

Installation Notes

  1. Release residual hydraulic‑system pressure and clean dirt on thread before installation;
  2. Tighten with standard torque to avoid thread damage, fit connector tightly for waterproof and dust‑proof;
  3. Clear fault codes after installation and test‑run the excavator.

 

 

中文参数English Parameter
零件型号Part Number:60114799
原厂型号Original Model:Danfoss MBS1250
测量量程Measuring Range:0‑500Bar(50MPa)
供电 & 输出Supply‑Output:5V Input,0.5‑4.5V Output
适配设备Applicable Equipment:Sany Excavator
适配机型Fit Models:SY215‑8‑9‑10,SY235,SY285,SY335‑8‑9‑10
插头样式Connector:2‑pin Round OEM plug‑in
密封配件Seal Parts:Built‑in O‑ring
核心部件Core Component:Imported Danfoss sensing chip
质保期限Warranty Period:3‑12 Months
安装方式Installation:Direct replacement without rewiring

Attention: Please leave your phone number and our professionals will contact you as soon as possible!